Laser Cutting
High repeatability with consistent, quality results
Laser cutting is one of Aluminum Line Products sheet metal fabrication services. We use modern high powered Fiber Laser systems up to 9000 watts to cut aluminum for different industrial applications. Laser cutting is more exact and uses less energy allowing us to cut parts with near perfect fit up, which reduces cost and the amount of time needed for sub-assemblies and weldments. We can produce parts up to 80”x 160”. Our capacity allows us to maximize efficiency and reduce lead time while delivering the highest quality part to our customer. At ALPCO, our manufacturing processes are ISO 9001:2015 certified and we are proud of our reputation for manufacturing the highest quality precision metal parts that meet or exceed your expectations.
More advantages of flat laser cutting
- High cutting speeds
- Close tolerances
- Only small areas affected by heat
- Minimal work hardening and metal deformation.
- High repeatability with consistent results
- Reduced work piece contamination
- Soft tool – no hard tooling expense and ability to design extremely complex parts that are too difficult to make with conventional tools.
- Aluminum Only
- Cost Effective

LCG AJ Series | LCG 3015 AJ 6KW FIBER LASER | LCG 4020 AJ 9KW FIBER LASER |
---|---|---|
WORK AREA | 60" x 120" | 80" x 160" |
SOFTWARE | ALLOWS MULTIPLE PART NESTING TO MINIMIZE SCRAP | |
RAPID TRAVERSE SPEED | 6,680" / MIN | |
MAXIMUM CUTTING SPEED | UP TO 4,724" / MIN DEPENDING ON MATERIAL TYPE AND THICKNESS | |
POSITION ACCURACY/REPEATABILITY | +0.0004" / 0.0002" | |
FASTER CUTTING OF THIN MATERIAL | 2 TO 3 TIMES THAT OF A COMPARABLE 4000 W C02 LASER | |
GAS MIXING TECHNOLOGY | SUPERIOR SPEED AND EDGE QUALITY IN MATERIAL THICKNESS UP TO 7/8" COMPARED TO OTHER SOLID-STATE SYSTEMS | SUPERIOR SPEED AND EDGE QUALITY IN MATERIAL THICKNESS UP TO 1.00" COMPARED TO OTHER SOLID-STATE SYSTEMS |
LCG 3015 AJ 6KW Fiber Laser
- WORK AREA - 60" x 120"
- SOFTWARE - ALLOWS MULTIPLE PART NESTING TO MINIMIZE SCRAP
- RAPID TRAVERSE SPEED - 6,680" / MIN
- MAXIMUM CUTTING SPEED - UP TO 4,724" / MIN DEPENDING ON MATERIAL TYPE AND THICKNESS
- POSITION ACCURACY / REPEATABILITY - +-0.0004" / 0.0002"
- FASTER CUTTING OF THIN MATERIAL - 2 TO 3 TIMES THAT OF A COMPARABLE 4000W C02 LASER
- GAS MIXING TECHNOLOGY - SUPERIOR SPEED AND EDGE QUALITY IN MATERIAL THICKNESS UP TO 7/8" COMPARED TO OTHER SOLID-STATE SYSTEMS
LCG 4020 AJ 9KW Fiber Laser
- WORK AREA - 60" x 160"
- SOFTWARE - ALLOWS MULTIPLE PART NESTING TO MINIMIZE SCRAP
- RAPID TRAVERSE SPEED - 6,680" / MIN
- MAXIMUM CUTTING SPEED - UP TO 4,724" / MIN DEPENDING ON MATERIAL TYPE AND THICKNESS
- POSITION ACCURACY / REPEATABILITY - +-0.0004" / 0.0002"
- FASTER CUTTING OF THIN MATERIAL - 2 TO 3 TIMES THAT OF A COMPARABLE 4000W C02 LASER
- GAS MIXING TECHNOLOGY - SUPERIOR SPEED AND EDGE QUALITY IN MATERIAL THICKNESS UP TO 1.00" COMPARED TO OTHER SOLID-STATE SYSTEMS